Connect your Wallbox charger to Lyvra

Supported Models

• Pulsar Plus
• Pulsar Max
• Commander 2 / Commander 2s
• Copper SB
• Quasar 1 / Quasar 2

Prerequisites

• A Wallbox charger installed and connected to Wi-Fi
• A myWallbox account with your charger registered
• The Lyvra app installed on your phone

Step 1: Prepare your myWallbox account

1. Open the myWallbox app or go to my.wallbox.com
2. Verify your charger is online and visible in your account
3. Note down the email address and password for your myWallbox account

Step 2: Add your charger in Lyvra

1. Open the Lyvra app and navigate to your location
2. Tap Add Asset → EV Charger → Wallbox
3. Enter your myWallbox account email and password
4. Lyvra will discover all chargers on your account — select the one(s) you want to add
5. Done! Your charger will appear on your dashboard

Step 3: Configure smart charging (optional)

Once connected, you can enable:

• Solar charging — Charges using your solar surplus
• Dynamic pricing — Charges during the cheapest hours
• Eco Smart — Wallbox's own eco mode works alongside Lyvra

Troubleshooting

• Charger not found: Make sure the charger is online in the myWallbox app
• Authentication failed: Double-check your myWallbox email and password
• Charger offline: Check your charger's Wi-Fi connection. Try power-cycling the charger
• Locking issues: If the charger is locked via myWallbox, it may reject remote commands. Unlock it first